Desert Rides

Off-Road Discussion Forum

Gear One Centerbore Hubs

All discussions, build up threads, and tech questions regarding ATVs, Motorcycles, Side x Sides (Rhinos), should be posted here.

Moderators: Admin1, DR1068, 9rocky, Ryan_P

Postby GMCrunner » Thu Oct 11, 2007 6:55 pm

Has anyone used these on their rhinos at all? We are puttin them on our race rhino and i just didnt know how well they have worked?
User avatar
GMCrunner
 
Posts: 129
Joined: Fri Mar 10, 2006 2:16 pm
Location: Flagstaff, Az

Postby GMCrunner » Mon Oct 15, 2007 11:27 am

well nevermind. We put it on this past week and tested the s#!% out of it! No probs at all. Did a little tuning on the Suspension and its off to AVI as returning CHAMPS!! lol
User avatar
GMCrunner
 
Posts: 129
Joined: Fri Mar 10, 2006 2:16 pm
Location: Flagstaff, Az

Postby partybarge_pilot » Mon Oct 15, 2007 1:11 pm

Since it's a-arm in the rear, you would think that they would be going with non-plunging CV's.
User avatar
partybarge_pilot
 
Posts: 1224
Joined: Fri Jun 06, 2003 5:59 pm
Location: leucadia

Postby GMCrunner » Mon Oct 15, 2007 4:48 pm

yeah but it would have to be way wider and we are limited to 70"s wide, outside of tire to out side of tire, in BITD
User avatar
GMCrunner
 
Posts: 129
Joined: Fri Mar 10, 2006 2:16 pm
Location: Flagstaff, Az

Postby partybarge_pilot » Tue Oct 16, 2007 8:31 am

Runnig non-plunging CV's would not make it any wider. On an A-arm car the splines will provide enough movment to take up whatever plunge you might have. They also get more angle...... An are stronger....... And last longer.......
Last edited by partybarge_pilot on Sun Feb 24, 2008 1:33 pm, edited 1 time in total.
User avatar
partybarge_pilot
 
Posts: 1224
Joined: Fri Jun 06, 2003 5:59 pm
Location: leucadia

Postby GMCrunner » Tue Oct 16, 2007 10:38 am

then i dunno other than i think someone would have came out with that setup already if it were that easy to do.
User avatar
GMCrunner
 
Posts: 129
Joined: Fri Mar 10, 2006 2:16 pm
Location: Flagstaff, Az

Postby WALSHMOTORSPORTS » Sun Feb 24, 2008 12:29 pm

I run all Gear-One micro stub rear and disc's upfront and love their stuff! The owner took really good care of me at last minute before the Baja 1000 and we didn't have any issues at all, not even a cv issue. Lance the owner has since called me to see how I liked there product and if it needed any improvments. Cust. service goes a long way in my book.
WALSHMOTORSPORTS
 
Posts: 36
Joined: Thu Dec 20, 2007 12:31 am


Return to Bikes/Quads/Side x Sides

cron